TM9-2350-261-34
1. Remove all power from SICPS system (see your-10
and TM11-7010-256-12&P).
2. Install all circuits on power supplies PS1 (1) and
PS2 (2).
3. Measure resistance between PS1 (+) OUTPUT ter-
minal (3) and DC bus bar at terminal 1 (4) of circuit
breaker CB15 (5).
4. Does multimeter read 0 ohms?
1. Replace lead 31E
(page 6-118).
2. Verify no faults found.
2.1-68
Change 3
