TM 9-2350-261-34
NOTE
Use wiring diagram page 2.1-57.
1. Measure resistance between reversing contactor
RC1-FWD terminal 51 ( 1) and terminal 52 (2).
2. Does multimeter read 0 ohms?
1. Raise faceplate (3) and secure with ten new
lockwashers (4) and screws (5).
2. Verify no faults found.
NO
1. Replace reversing contactor
RC1 (page 6-105).
2. Raise faceplate (3) and se-
cure with ten new
lockwashers (4) and
screws (5).
3. Verify no faults found.
C h a n g e 3 2 . 1 - 6 3
