TM 9-2350-261-20-4
REPLACE CASCADE REMOTE HARNESS (M1068 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Personnel Required
Maintenance Level
Power-Generation Equipment Repairer 52D10
Unit
Equipment Condition
Tools and Special Tools
Engine stopped (see your -10)
Carrier blocked (see your -10)
Materials/Parts
All external power disconnected (TM 11-7010-256-
Locknut (4)
12&P)
Lockwasher (10)
Battery ground lead disconnected (WP 0294 00)
Lockwasher (10)
REMOVAL
1.
Remove faceplate (1) on inverter housing A2 (2) by removing ten screws (3) and lockwashers (4). Discard lockwashers.
2.
Loosen captive screws on connectors and disconnect RP1 harness (5) from inverters (6).
3.
Remove ten screws (7), and lockwashers (8), from faceplate (9). Lower faceplate (9) to gain access to RP1 harness
(5). Discard lockwashers.
4.
Remove four locknuts (10), screws (11), and RP1 remote harness (5) from faceplate (9). Remove harness. Discard
locknuts.