TM 9-2350-261-20-4
REPLACE AC LIGHT CABLE (W11) (M1068 ONLY) -- Continued
0747 00
INSTALLATION
1.
Install cable W11 (8) in carrier.
2.
Connect cable W11 plug P2 (8) to AC light plug P1 (1).
3.
Install two loop clamps (2) and secure to hull with two screws (9).
4.
Secure cable with five new tie straps (3).
5.
Install five loop clamps (4) and secure to hull with five screws (10).
6.
Install three loop clamps (5) and secure to hull with three screws (11).
7.
Connect cable W11 plug P17 (6) to power control box A1 jack J37 (7).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM 11-7010-256-12&P
3.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
