TM 9-2350-261-20-4
REPLACE AC POWER EXTENSION CABLE (W7) (M1068 ONLY) -- Continued
0743 00
INSTALLATION
1.
Install new cable in carrier.
2.
Connect cable W7 plug P1 (1) to roadside AC power extension box A6 jack J1 (2).
3.
Install cable through four loop clamps (3) and secure with four screws.
4.
Attach six new tie straps (4).
5.
Connect cable W7 plug P10 (5) to power control box A1 jack J30 (6).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM
11-7010-256-12&P.
3.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
