TM 9-2350-261-20-4
REPLACE CASCADE REMOTE HARNESS (M1068 ONLY) -- Continued
0745 00
INSTALLATION
1.
Install RP1 harness (1), four screws (2), and new locknuts (3) on faceplate (4). Route RP1 harness leads down through
power enclosure (5) and behind inverter housing A2 to front face of inverters. Avoid interfering with other components
in power enclosure.
2.
Lift faceplate (4) in place and install ten new lockwashers (6) and screws (7).
3.
Connect RP1 harness (1) to front of inverters (8). Tighten captive screws on connectors.
4.
Install faceplate (9) on front of inverter housing A2 (10) with ten new lockwashers (11) and screws (12).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
END OF TASK
