TM 9-2350-261-20-2 R E P L A C E E N G I N E P O W E R D I S C O N N E C TDESCRIPTIONThis task covers:Remove (page 23-57).Install (page 23-58).Adjust (page 23-59).INITIAL SETUP Tools:General Mechanics Tool Kit (Item 30, App D)Torque Wrench (Item 95, App D)Materials/Parts:Antiseize compound (Item 4, App C)Cotter pinSelf-locking nut (2)Tab washer (2)Personnel Required:Unit MechanicReferences:See your -10Equipment Conditions:Engine stopped/shutdown and ramp lowered(see your -10)Carrier blocked (see your -10)Power plant rear access panel removed(page 24-27) or (page 24-29)Driver’s power plant access panel removed(page 25-25)REMOVE1. Remove two screws (1), locknuts(3), one lock (4), bushing (5) andfrom lever (7). Discard locknuts.(2), supportsspring (6)2.3.4.Remove cotter pin (8) and pin (9) that se-cures lever (7) to arm (10). Discard cotterpin.Remove lever (7) from guide (11).Remove two screws (12), tab washers (13),and guide (11) from transmission housing.Discard tab washers.GO TO NEXT PAGE23-57
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business