TM 9-2350-261-20-2
REPAIR UPPER ACCELERATOR LINKAGE
INITIAL SETUP
Tools:
Personnel Required:
General Mechanics Tool Kit (Item 30, App D)
Unit Mechanic
Materials/Parts:
Equipment Conditions
Grease (Item 18, App C)
Engine stopped/shutdown (see your -10)
Self-locking nut
Upper accelerator linkage removed from
earner (page 23–31)
REMOVE
1.
2.
Remove locknut (1), screw (2), and inner
transfer shaft (3) from outer transfer
shaft (4). Discard locknut.
Remove outer transfer shaft (4) from transfer
shaft bracket (5).
CLEAN, INSPECT, AND REPLACE
3. Check links, shafts, and brackets for wear
and damage. Replace if needed.
INSTALL
N O T E
Lubricate bearing surfaces of shafts be-
fore assembly. Use GAA grease.
4. Place outer transfer shaft (4) in transfer
shaft bracket (5).
5. Insert inner transfer shaft (3) into outer
transfer shaft (4).
6. Secure shaft (3) to bracket (5) with screw (2)
and new locknut (1).
FOLLOW-THROUGH STEPS
1. Install upper accelerator linkage (page 23-31).
END OF TASK
23-33
