T M
13.
14.
15.
9-2350-261-20-2
Loosen locknut (1).
(2) in to allow free
pedal (3).
Loosen locknut (4).
Turn detent stop screw
16.
movement of accelerator
17.
Remove screw (5), nut
(6), and throttle link (7) from outer transfer
shaft (8).
Loosen locknut (9). Remove screw (10), nut
(11), and accelerator pedal link (12) from
18.
bellcrank (13).
19.
Place governor throttle arm (14) and bell-
crank (1.5) in full throttle position.
Align holes in throttle link (7) and outer
transfer shaft (8) so screw (5) will pass
through freely. Shorten throttle link (7) by
turning bearing end (16) 11 turns to the
right .
Install throttle link (7) on outer transfer
shaft (8). Secure with screw (5) and nut
(6). Tighten locknut (4) on link (7).
Adjust idle stop (page 23-37).
23-36
Change 1