TM 9-2350-261-20-2
ADJUST UPPER ACCELERATOR
PEDAL DETENT STOP
26.
27. With pedal (4) in full throttle position, trav-
el spring (5) should be compressed so a gap
of 1/64 to 3/64 inch (0.4 to 1.0 mm) exists
Loosen locknut (1). Adjust stop screw (2) so
between pivot pin (6) and rod stop (7).
detent plunger (3) will contact stop screw at
full throttle position.
28. Adjust upper accelerator pedal toe stop
(page 23-39).
23-38
