TM 9-2350-261-20-2
R E P L A C E T R A N S M I S S I O N O I L F I L T E R A N D D R A I N
DESCRIPTION
This task covers:
Remove (page 18-8).
Clean, Inspect, and Repair (page 18-8).
Install (page 18-9).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts:
Dry cleaning solvent (Item 13, App C)
Gasket
Oil filter parts kit
Suitable container
Personnel Required:
Unit Mechanic
References:
see your -10
See your LO
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Driver’s power plant access panel removed
(page 24-25)
Hull bottom access cover removed
(page 24-32)
Differential oil pump hose disconnected
(page 21-2)
REMOVE
1.
2.
3.
4.
Drain transmission (see your LO).
Remove drain plug (1) and gasket (2) from
transmission (3). Discard gasket.
Remove nut (4), screw (5), strap (6), and
cover (7) from transmission (3).
Remove spring (8), retainer (9), two
preformed packings (10 and 11), and element
(12) from transmission (3). Discard packings
and element.
CLEAN, INSPECT, AND REPAIR
W A R N I NG
5.
6.
Dry cleaning solvent is
flammable. Keep it away
from heat or open flame.
Use in well ventilated area.
Do not let it get on your
skin.
Clean transmission oil filter element cavity
with dry cleaning solvent.
Check cover and strap. Replace or repair
cover or strap that is cracked or bent.
7. Check plug and screw. Replace plug or screw
that has stripped threads.
18-8
