TM 9-2350-261-20-2
INSTALL
8.
9.
10.
11.
Install new preformed packing (1), new ele-
ment (2), and new preformed packing (3) in
transmission (4).
Install retainer (5), spring (6), cover (7),
and strap (8), on transmission (4). Secure
with screw (9) and nut (10).
Install new gasket (11) and drain plug (12)
in transmission (4).
Fill transmission with oil (see your LO).
W A R N I N G
Carbon monoxide is poison-
ous and can kill you. Do not
idle engine with bottom
access cover and power
plant access panels off
unless there is VERY GOOD
AIR FLOW.
Connect differential oil pump hose
12.
13.
(page 21-2).
Start engine (see your -10). Check for leaks.
FOLLOW-THROUGH STEPS
1. Stop/shutdown engine (see your -10).
3. Install drivers power plant access panel
(page 24-25).
2. Install hull bottom access cover (page 24-32).
END OF TASK
18-9 (18-10 blank)