TM 9-2350-261-20-2
6.
7.
8.
9.
W A R N I N G
Air pressure in excess of 30
psi (207 kpa) can injure per-
sonnel. Do not direct pres-
surized air at yourself or
others. Always wear gog-
gles..
10.
11.
12.
Attach radiator cleaning tool to available air
supply.
Rinse radiator with clear water.
Clean sand, oil, and debris from radiator.
Remove siphon hose from detergent solution.
AIR SUPPLY LINE
LIQUID SUPPLY LINE
Remove excess water with available air
supply.
Uncover exposed engine openings.
Secure radiator access door (1) to radiator
opening with two fasteners (2).
13. Secure radiator access panel (3) to power
plant compartment bulkhead with two
clamps (4) and thumbscrews (5).
FOLLOW-THROUGH STEPS
1. Install hull bottom access cover (page 24-32).
4.
2. Install driver’s power plant access panel
(see your -10).
5.
3. Install power plant rear access panel
(see your -10).
Close power plant front access door
(see your -10).
Raise trim vane (see your -10).
END OF TASK
8-8
