TM 9-2350-261-20-2
R E P L A C E B A T T E R Y B O X I N S U L A T I O N A N D H E A T E X C H A N G ER
(M113A2, M741A1, M901A1, AND M1059 ONLY)
DESCRIPTION
This task covers:
Remove (page 13-37).
Clean, Inspect, and Repair (page 13-38).
Install (page 13-38).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts:
Sealing compound (Item 52, App C)
Sodium Bicarbonate (Item 55, App C)
Grommet (2)
Personnel Required:
Unit Mechanic
References:
See your -10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your –10)
Batteries removed (page 13-18)
Carrier cooling system drained (page 8-3)
Coolant heater system drained (page 32-10)
REMOVE
1.
2.
3.
4.
Loosen two clamps (1) on two hoses (2). Re-
move hoses from heat exchanger (3). Remove
clamps from hoses.
On M741A1 carriers, loosen six clamps (1).
Remove two hoses (2) from two elbows (4).
Remove two elbows from two short hoses (5).
Remove short hoses and clamps from heat
exchanger (3).
Remove heat exchanger (3) from battery box
(6). Remove clamps from heat exchanger.
Remove two grommets (7) from battery box
(6). Discard grommets.
GO TO NEXT PAGE
13-37
