TM 9-2350-261-20-2 R E P L A C E B A T T E R Y D R A W E R I N S U L A T I O N A N D H E A TE X C H A N G E R ( M 1 0 6 A 2 , M 1 2 5 A 2 , A N D M 1 0 6 4 O N L Y)DESCRIPTIONThis task covers:Remove (page 13-32).Clean, Inspect, and Repair (page 13-33).Install (page 13-33).INITIAL SETUP Tools:References:General Mechanics Tool Kit (Item 30, App D)See your -10Materials/Parts:Equipment Conditions: Sealing compound (Item 52, App C)Engine stopped/shutdown (see your -10)Sodium bicarbonate (Item 55, App C)Carrier blocked (see your -10)Ramp lowered (see your –10)Personnel Required: Batteries removed (page 13-18)Unit MechanicCarrier cooling system drained (page 8-3)Coolant heater system drained (page 32-10)REMOVE1.2.3.4.5.Remove four nuts (1), washers (2), screws(3), and two brackets (4) from batterydrawer (5).Loosen four clamps (6). Remove two hoses (7)from heat exchanger (8) and two elbows (9).Remove clamps from hoses.Remove battery drawer (page 13-24).Remove heat exchanger (8) from batterydrawer (5).If damaged, remove top insulation sheet (10),bottom insulation sheet (11), rear insulationsheet (12), right insulation sheet (13), andleft insulation sheet (14) from battery drawershield (15).13-32Change 2
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business