TM 9-2350-261-20-2
17.
18.
20,
Remove two straps (1) and rear main wir-
ing harness (2) from fuel tube (3).
Remove cradle clip (4) and harness (2) from
cradle (5).
Remove two screws (6), lockwashers (7),
guard (8), and ground strap (9) from hull.
Discard lockwashers.
Remove two screws (10), nuts (11), clamps
(12), and wiring harness (2) from guard (8).
21.
22.
23.
24.
25.
Remove four screws (13), lockwashers (14),
guard (15), and left tail light (16) from hull.
Discard lockwashers.
Disconnect circuits 21, 22, and 24 leads
(17, 18, and 19) from left tail light (16).
Remove three terminals (20), insulators (21),
and connectors (22) from three leads
(17, 18, and 19). Discard terminals.
Remove nut (23) and bushing (24) from
connector (25).
Pull three leads (17, 18, and 19) through
connector (25).
GO TO NEXT PAGE
12-121
19.
