TM 9-2350-261-20-2
113. Secure harness (1) to two lower bilge tube
115. Insert harness right side branch (1)
clamps (2) with two clamps (3), screws (4),
through hole in hull top.
and new lockwashers (5).
116. Install connector (10) in hull.
114. Secure harness (1) to upper bilge tube
clamp (6) with clamp (7), screw (8), and
117. Secure harness (1) in connector (10) with
new locknut (9).
rubber bushing (11), washer (12), and
nut (13).
GO TO NEXT PAGE
Change 2
12-118.19