TM 9-2350-261-20-2
8 2.
83.
84.
85.
Attach twine (1) that was left in transverse 86.
beam (2) to circuit 38 lead (3). Pull lead
through transverse beam (2) into personnel
compartment. Remove twine from lead.
87.
Secure circuit 38 lead (3) to three weldnuts
(4) on transverse beam with three clamps
(5), screws (6), and new lockwashers (7).
88.
Connect circuit 38 lead (3) to dome light (8).
Install harness (9) in two cradles (10) and
89.
secure with clips (11).
Install circuit 48 lead (12) and new
grommet (13) in battery box (14).
Install circuit 6 and 48 leads (15 and 12)
on battery terminal (16). Secure with
screw (17) and nut (18).
Push battery drawer (19) in and turn
handle (20) counterclockwise to lock drawer.
Raise left crew seat backrest.
Install circuit 48 lead (12) in cradle (21)
and secure with clip (22).
12-118.14
Change 2