TM 9-2350-261-20-2
96. Insert harness left side branch (1) through
100.
hole in hull top.
97. Install connector (2) in hull.
101.
98. Secure harness (1) in connector (2) with
rubber bushing (3), washer (4), and nut (5).
99. Insert harness (1) through hole in rear
plate (6).
Install harness guard (7) on top of rear
hull. Secure with screw (8), wisher (9),
and new lockwasher (10).
Route harness (1) along top of left fuel
tank (11) and install harness bracket (12)
over harness (1). Secure with two
screws (13), washers (14), and new
lockwashers (15).
.
12-118.16
Change 2