TM 9-2350-261-20-2
CLEAN, INSPECT, AND REPAIR
3. Check lamp. Replace burned-out or cracked
lamp.
4. Check lens. Replace cracked or chipped lens.
5. Check seal and mounts. Replace cut, cracked,
or hard seal and mounts.
6. Check plate and bracket. Replace any cracked
or deformed parts.
7. Check threaded parts. Remove burrs. Replace
parts that have stripped threads.
ASSEMBLE
8. To assemble dome light mount, do the
following:
a.
b.
9. To
a.
b.
Install three mounts (1) between bracket
(2) and hull mount (3). Secure with six
new locknuts (4) and three washers (6).
Place two large gaskets (6) on mount
plate (7). Install plate on bracket (2).
Secure with two large gaskets (6), small
washers (8), nut (9), and knob (10).
assemble dome light, do the following:
Installl lamp (11) in light body (12). Push
in and turn to the right to secure lamp.
Apply sealing compound to inside of door
(13). Install seal (14) and lens (15) on
door.
F O L L O W - T H R O U G H S T E P S
1. Install dome light (page 12-64).
END OF TASK
12-66