TM 9-2350-261-20-2CLEAN, INSPECT, AND REPAIR9. Check all light bulbs for damage and replacewhere needed.10. Check lenses, gaskets, and all other partsfor damage. Replace all damaged parts.INSTALL11.12.13.14.15.16.17.Install lens (1) and lens (2) with gasket (3)on retainer (4).Install plunger (5) with plunger (6) in knob(8) and secure with setscrew (7).Install stitch (9) through retainer (4).Install gasket (10) and washer (11) onswitch (9) and secure with nut (12).Install knob (8), new lockwasher (13), andscrew (14) on switch (9).Install blackout bulb (15) and Light bulb (16)in light body (17). Push in and turn bulbsto the right to secure.Install new seal (18) on retainer (4).Place retainer (4) on light body (17). Securewith eight screws (19).F O L L O W - T H R O U G H S T E PS1. Install dome light (page 12-60).3. Turn MASTER SWITCH OFF (see your -10).2. Turn MASTER SWITCH ON (see your -10).Check dome lights for proper operation.END OF TASK12-62
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business