TM 9-2350-261-20-2
REPLACE LEFT STOP LIGHT-TAIL LIGHT
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
See your -10
Materials/Parts:
Equipment Conditions:
Gasket
Engine stopped/shutdown (see your -10)
Lockwasher (6)
Battery ground lead disconnected (page 13-2)
Carrier blocked (see your –10)
Personnel Required:
Unit Mechanic
REMOVE
1.
2.
3.
Remove four screws (1) and lockwashers (2).
Pull guard (3), with stop light-tail light (4)
attached, away from hull. Discard
lockwashers,
Disconnect circuit 21 lead (5), circuit 22 lead
(6), and circuit 24 lead (7) from tail light
leads (8).
Remove two screws (9), lockwashers (10), tail
NOTE
4.
5.
6.
M577A21 does not have items (1), (2),
or (3).
Discard gasket and lockwashers.
INSTALL
Place new gasket (11) and
guard (3). Secure with two
(10) and screws (9).
Connect circuit 24 lead (7),
(6), and circuit 21 lead (5)
leads (8).
tail light (4) on
new lockwashers
circuit 22 lead
to tail light
Place guard (3), with tail light (4) attached,
on hull. Secure with four new lockwashers (2)
and screws ( 1).
FOLLOW-THROUGH STEPS
1. Connect battery ground lead (page 13-2).
2. Turn MASTER SWITCH ON. Operate main
light switches to check that left stop
light-tail light is operable. Turn all switches
OFF (see your -10).
END OF TASK
12-12
