TM 9-2350-261-20-1
R E P L A C E F I L L E R C A P A N D S T R A I N E R P A R T S ( M 7 4 1 A 1 O N L Y )
INITIAL SETUP
Tools:
References:
General Mechanics Tool kit (Item 30, App D)
See your -10
Materials/Parts:
Equipment Conditions:
Nonelectrical wire (Item 31, App C)
Engine stopped/shutdown (see your –10)
Gasket
Carrier blocked (see your -10)
Battery ground lead disconnected (page 13-2)
Personnel Required:
Filler cover and lock removed (page 6-7 )
Unit Mechanic
REMOVE
1.
2.
3.
Remove lock wire (1), 12 screws (2), filler
neck (3), strainer (4), gasket (5), and flange
(6) from fuel compartment access cover (7).
Discard gasket and lock wire.
Open spring clip (8) and disconnect filler cap
(9) chain from retainer (10).
Remove filler cap (9) and retainer (10) from
fuel tiller neck (3).
INSTALL
4.
5.
6.
7.
8.
Install flange (6) in fuel compartment access
cover (7).
Install strainer (4) in flange (6).
Place filler cap (9) chain through filler neck
(3). Secure retainer (10) to filler cap chain
with spring clip (8) .
Install retainer (10) in filler neck (3).
Secure filler neck (3) and new gasket (5) to
fuel compartment access cover (7) with 12
9. Install new lock wire (1) through the heads
of 12 screws (2). Secure with double twist
method.
10. Install filler cap (9) in filler neck (3).
screws (2).
GO TO NEXT PAGE
6-89
