TM 9-2350-261-20-l
REPLACE FUEL TANK INTERNAL HOSES, TUBES, AND
FITTINGS (M125A2 AND M106A2 ONLY)
DESCRIPTION
This task covers:
Remove (page 6-85).
Install (page 6-86).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts:
Non-electrical wire (Item 31, App C)
Wiping rag (Item 61, App C)
Personnel Required:
Unit Mechanic
References:
See your-10
Equipment Conditions:
Carrier blocked (see your-10)
Engine stopped/shutdown (see your-10)
Ramp lowered (see your -10)
Battery ground lead disconnected (page 13-2)
Fuel compartment drained (page 6-77)
Filler cover and lock removed (page 6-7)
Filler cap and strainer parts removed
(page 6-78)
Fuel compartment access cover removed
(page 6-79)
REMOVE
WARNING
Fuel flowing over a metal
surface
causes
static
electricity. This will cause a
spark unless the surface is
grounded.
NOTE
Use wiping rag to wipe up any spilled fuel.
1. Remove lockwire (1), five screws (2), and
clamps (3) that secure fuel pickup tube (4)
and fuel return tube (5) to five weldnuts
(6). Discard lockwire.
2.
3.
4.
5.
Disconnect pickup
Remove elbow (7)
compartment (8).
Disconnect return
Remove elbow (9)
compartment (8).
tube (4) from elbow (7).
from fuel
tube (5) from elbow (9).
6-85
