TM 9-2350-261-20-1
R E P L A C E F U E L C O M P A R T M E N T A C C E S S C O V E R
( M 7 4 1 A 1 O N L Y)
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Torque Wrench (Item 96, App D)
Materials/Partsi
Gasket
Seal
Personnel Required:
Unit Mechanic
References:
see your-10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10
Battery ground lead disconnect (page 13-2)
Filler cover and lock removed (page 6-7)
Filler cap and strainer parts removed
(page 6-89)
REMOVE
1.
2.
Remove six screws (1) that secure access
cover (2) to filler flange (3).
Remove eight screws (4), washers (5), access
cover (2), gasket (6), and seal (7) from fuel
compartment opening. Discard gasket and
seal.
INSTALL
3.
4.
5.
6.
Install new gasket (6) and access cover (2)
on fuel compartment opening. Secure with
eight screws (4) and washers (6).
Tighten eight screws (4) to 60-65 lb-ft
(81-88 N-m) torque. Use torque wrench.
Secure access cover (2) to filler flange (3)
with six screws (1).
Install new seal (7) between access cover (2)
and filler flange (3). Cut to length and press
seal between cover (2) and flange (3). No gap
allowed between filler flange and access cover.
FOLLOW-THROUGH STEPS
1. Install filler cap and strainer parts
2. Install filler cover and lock (page 6-7).
(page 6-89).
3. Connect battery ground lead (page 13-2).
END OF TASK
6-91