TM 9-2350-261-20-1
R E P L A C E F I L L E R C A P A N D S T R A I N E R P A R T S ( M 1 2 5 A 2 A N D
M 1 0 6 A 2 O N L Y)
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts
Non-electrical wire (Item 31, App C)
Gasket
Personnel Required:
Unit Mechanic
References:
See your -10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Battery ground lead disconnected (page 13-2)
Filler cover and lock removed (page 6-7)
Fuel compartment drained (page 6-77)
Carrier blocked (see your -10)
R E M O V E
1.
2.
Remove fuel filler cap (1) and retainer (2)
from fuel filler neck (3).
Remove lockwire (4), 12 screws (5), filler neck
(3), strainer (6), and gasket (7) from fuel
compartment access cover (8). Discard gasket
and lockwire.
3. Open spring clip (9) and disconnect filler cap
(1) chain from retainer (2).
I N S T A L L
4.
5.
6.
Install strainer (6) in fuel compartment
access cover (8).
Place filler cap (1) chain through filler neck
(3). Secure retainer (2) to chain with spring
clip (9).
Install filler neck (3) and new gasket (7) on
7. Install new lockwire (4) on filler neck
through the heads of 12 screws (5).
(3)
fuel compartment access cover (8). Secure
with 12 screws (5).
8. Install filler cap (1) in tiller neck (3).
FOLLOW-THROUGH STEPS
1. Install filler cover and lock (page 6-7).
3. Fill fuel compartment (see your -10).
2. Connect battery ground lead (page 13-2).
6-78
END OF TASK
