TM 9-2350-261-20-1
15.
Install fuel cap locking thumbscrew (1) in
carrier bulkhead.
NOTE
Save
lifting
bracket
screws
for
installation of tail light bracket.
16.
Remove two screws (2) and angle lifting
bracket (3) from fuel tank (4).
NOTE
Two pipes are installed in both fuel tanks
the same way.
17.
Apply primer to threads of pipe (5). coat
threads with sealing compound (Item 46).
18.
Install pipe (5) in fuel tank (4).
NOTE
Fuel hoses are installed
tanks the same way (right
shown).
on both fuel
side fuel tank
Do steps 19 thru 26 on M981 only.
19.
20.
21.
22.
23.
24.
25.
26.
Apply sealing compound (Item 50) to pipe
threads on nipples (6 and 7) and unions
(8 and 9).
Install nipples (6 and 7) in fuel tank (4).
Install unions (8 and 9) on
nipples (6 and 7).
Install fuel
with arrow
Install fuel
with arrow
supply valve (10) on union (8)
pointing toward the engine.
return valve (11) on union (9)
pointing toward fuel tank.
Install adapters (12 and 13) in
valves (10 and 11).
Connect fuel supply hose (14) to
adapter (12).
Connect fuel return hose (15) to
adapter (13).
GO TO NEXT PAGE
Change 2
6-37
