TM 9-2350-261-20-1
REPLACE FUEL QUANTITY TRANSMITTER
(M981 AND M1064 ONLY)
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
See your -10
Materials/Parts:
Equipment Conditions:
Sealing compound (Item 46, App C)
Engine stopped/shutdown (see your –10)
Lock washer (2)
Carrier blocked (see your -10)
Battery ground lead disconnected (page 13-2)
Personnel Required:
Fuel tanks drained (page 6-30)
Unit Mechanic
Fuel tank access covers removed (page 6-33)
Tail lights and guards removed (page 12-57)
REMOVE
3.
1.
2.
NOTE
Right and left fuel quantity transmitters
4.
are the same. The following steps apply to
one unit.
5.
Disconnect lead (1) from transmitter (2). (Cir-
cuit 30A is left tank transmitter. Circuit
is right tank transmitter).
Remove two screws (3), lockwashers (4),
washers (5), bracket (6), and transmitter
from fuel tank (7). Discard lock washers.
31A
6.
(2)
7.
Remove screw (8), washer (9), and clamp
(10) that secures lead (1) to fuel tank (7).
Remove shell (11) and washer (12) from lead(1).
Remove nut (14) and bushing (15) from con-
nector (16).
Remove connector (16) and lead (1) from fuel
tank (7).
Remove five screws (17) and nuts (18). Sepa-
rate transmitter (2) from bracket (6).
6-32
Change 2
