8. Apply a thin coat of sealing compound to cle-
aned external threads of connector (1) before
installation.
13.
9. Secure transmitter (2) to bracket (3) with
five screws (4) and nuts (5).
14.
10. Install bracket (3) and transmitter (2) on
fuel tank (6). Secure with two screws (7),
15.
new lockwashers (8), and washers (9).
11. Install lead (10) and connector (1) in
tank (6).
TM 9-2350-261-20-1
Connect lead (10) to transmitter (2). (Circuit
30A is left tank transmitter. Circuit 31A is
right tank transmitter).
Secure lead (10) to tank (6) with clamp
(11), washer (12), and screw (13).
Install bushing (14) and nut (15) on
connector (1).
Install shell (16) and washer (17) from lead(10).
FOLLOW-THROUGH STEPS
1. Install fuel tank access covers (page 6-33).
4. Check that fuel level transmitter works
properly (see your –10).
2. Fill fuel tanks (see your –10).
5. Install tail lights and guards (page 12-57).
3. Connect battery ground lead (page 13-2).
END OF TASK
Change 2
6-33
12.
I N S T A L L
