TM 9-2350-261-20-1
REPLACE FILLER CAP AND STRAINER PARTS
(M981 AND M1064 ONLY)
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
See your -10
Materials/Parts:
Equipment Conditions:
Non-electrical wire (Item 31, App C)
Engine stopped/shutdown (see your -10)
Gasket
Carrier blocked (see your -10)
Battery ground lead disconnected (page 13-2)
Personnel Required:
Combat filler cover open (see your -10)
Unit Mechanic
1.
2.
3.
4.
Unfasten fuel filler cap and chain assembly
(1) from filler neck (2).
Remove lockwire (3), 12 screws (4), filler neck
(2), strainer (5), and filler cap and chain as-
sembly (1) from hull top. Discard lockwire.
Pull filler cap and chain assembly ( 1 ) through
opening in filler neck (2).
Remove gasket (6). Discard gasket.
5.
6.
7.
8.
9.
Install new gasket (6).
Install filler cap and chain assembly (1)
through filler neck (2).
Secure filler neck (2), strainer (5), and filler
cap and chain assembly (1) to hull top with
12 screws (4).
Install new lockwire (3) thru heads of 12
screws (4).
Fasten filler cap and chain assembly (1) in
filler neck (2).
FOLLOW-THROUGH STEPS
1. Connect battery ground leads (page 13-2).
2. Combat filler cover closed and locked
(see your -10).
END OF TASK
6-30
Change 2
R E M O V E
I N S T A L L