TM 9-2350-261-20-1
INSTALL
6.
7.
8.
Apply a thin coat of antiseize compound to
clean threads of four screws (l).
Place bracket (2) and oil filler tube bracket
(3) on transmission. Secure with four screws
(1) and new tab washers (4).
Apply a thin coat of sealing compound to
cleaned external threads of two elbows
(5 and 6).
9.
10.
11.
Install two elbows (5 and 6) in engine block.
Connect engine oil hose (7) to elbow (5)
engine oil hose (8) to elbow (6). Use
adjustable and open end wrenches.
Install clamp (9) on engine oil hose (7).
Secure clamp to bracket (2) with screw
washer (11), and nut (12).
and
(10),
FOLLOW-THROUGH STEPS
1. Start engine (see your -10). Check for leaks.
3. Install engine oil filter assembly (page 4-5).
2. Stop/shutdown engine (see your -10). Wait
4. Install differential oil falter assembly
about 20 minutes for oil to drain back to oil
(page 21-6).
pan. Then check engine oil level
(see your -LO). Add oil if needed.
5. Install power plant (page 5-11).
END OF TASK
4-8