TM 9-2350-261-20-1
R E P L A C E C R A N K C A S E B R E A T H E R C O L L E C T O R C A N A N D H O S E
DESCRIPTION
This task covers: Remove (page 4-11). Install (page 4-12).
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
see your -10
Socket Wrench Set (Item 89, App D)
see your Lo
Torque Wrench (Item 95, App D)
Equipment Conditions:
Materials/Parts:
Engine stopped/shutdown (see your -10)
General lubricating oil (Item 16, App C)
Carrier blocked (see your -10)
Tab washer (2)
Power plant rear access panel removed
(page 24-27 or 24-29)
Personnel Required:
Driver’s power plant access panel removed
Unit Mechanic
(page 24-26)
REMOVE
1.
2.
3.
4.
6.
Disconnect two drain hoses (11 and 12) from
collector can bracket (10).
Remove two wing nuts (13), washers (14),
retainer (15), collector can (16), and element
(17) from collector can bracket (10).
Remove two screws (18), tab washers (19),
and collector can bracket (10)
transmission. Discard tab washers.
GO TO NEXT PAGE
4-11
Remove two screws (1), washer (2), nut (3),
two clamps (4), clamp (5), and breather hose
(6) from power plant disconnect bracket and
from engine.
Remove screw (7), clamp (8), nut (9), and
breather hose (6) from collector can
bracket.
