TM 9-2350-261-20-1
1. Remove cable W9 plug P15 (1) from Power Control
Enclosure jack J35 (2).
2. Set DC RIGHT OUTLETS switches (3) on Power
Control Enclosure panel to ON
(see TM 11-7010-256-12&P).
3. Set MASTER SWITCH to ON (see your -10).
4. Measure voltage between sockets A and B of jack
J35 (2). Repeat measurement for sockets C and D.
5. Does multimeter read 22 volts DC or more for both
measurements?
3-226.32
Change 3
GO TO PAGE 3-226.34