TM 9-2350-261-20-1
1. Remove cable W10 plug P14 (1) from Power Control
Enclosure jack J34 (2).
2. Turn MASTER SWITCH to ON (see your -10).
3. Set DC LEFT OUTLETS switches (3) on Power Control
Enclosure panel to ON (see TM 11-7010-256-12&P).
4. Measure voltage between sockets A and B of jack
J34 (2). Repeat measurement for sockets C and D.
5. Does multimeter read 22 volts DC or more for each
measurement?
GO TO PAGE 3-226.38
3-226.36
Change 3
