TM 9-2350-261-20-1
1. Turn MASTER SWITCH to OFF (see your -10).
2. Remove cable W10 plug P1 (1) from DC Power
Extension Box A9 jack J1 (2).
3. Measure resistance between pins of plugs P1 (1) and
P14 (3) on cable W10 as follows:
P1 pin A to P14 pin A
P1 pin B to P14 pin B
P1 pin C to P14 pin C
P1 pin D to P14 pin D
4. Does multimeter read 0 ohms for each set of pins?
1. Replace DC Power Extension Box A9 (page 40.1-48).
2. Verify no faults found.
1. Replace cable W10
(page 40.1-73).
2. Verify no faults found.
Change 3
3-226.37
