TM 9-2350-261-20-1
1.
2.
3.
4.
Remove cable W8 plug P11 (1) from Power Control
Enclosure jack J31 (2).
With AC power accepted, set AC RIGHT OUTLETS
switches (3) on Power Control Enclosure panel to ON
(see TM 11-7010-256-12&P).
Measure voltage between sockets A and B of jack
J31 (2). Repeat measurement for sockets C and D.
Does multimeter read 110 volts AC or more for both
measurements?
GO TO PAGE 3-226.30
3-226.28
Change 3