TM 9-2350-247-20-2
REPLACE EXHAUST PIPES (M548A1) -- Continued
0209 00
INSTALLATION
1.
Place left crossover pipe (1) and clamp (2) on left engine manifold. Place right crossover pipe (3) and clamp (4) on right
engine manifold. Do not tighten clamps.
NOTE
Make sure ball sockets of exhaust pipe are aligned with left crossover pipe before tightening
clamps.
2.
Install interior exhaust pipe (5) on left crossover pipe (1) and muffler (6). Secure with clamp (7).
3.
Tighten clamps (2, 4, and 7) to 200-220 lb-in (23-25 Nm) torque.