TM 9-2350-247-20-2
ADJUST THROTTLE PEDAL TO FULL THROTTLE AND IDLE POSITIONS (M548A1) --
0199 00
Continued
NOTE
Toe stop screw (2) may be mounted on hull or on throttle pedal. Adjust screw the same way in
either location.
3.
Adjust toe stop screw as follows:
a.
Remove jam nut (1) and toe stop screw (2) from throttle control link (3) and cross shaft bellcrank (4).
b.
Press throttle pedal (5) until transmission throttle arm (6) is in full throttle position. Loosen jam nut (7) and adjust
stop screw (8) to 1/16 in (2 mm) gap between toe stop screw (8) and stop.
c.
Install throttle control link (3) on cross shaft bellcrank (4). Secure with toe stop screw (2) and jam nut (1).
0199 00-5
