TM 9-2350-247-20-2
ADJUST THROTTLE PEDAL TO FULL THROTTLE AND IDLE POSITIONS (M548A1) --
0199 00
Continued
h.
Install screw (4) through throttle control link bearing (12) and cross shaft bellcrank (5). Secure with new lock
nut (3).
i.
Place governor throttle arm (11) in idle position and throttle pedal (13) against accelerator pedal heel stop (14).
j.
Align holes in throttle pedal link bearing (15) and cross shaft (10) so screw (8) will pass through both freely.
k.
Turn throttle pedal link bearing (15) one full turn to lengthen throttle pedal link (7). Tighten jam nut (6) securely on
throttle pedal link bearing (15). Install screw (8) through throttle pedal link (7) and cross shaft (10). Secure with
new lock nut (9).
0199 00-3
