TM 9-2350-247-20-2
ADJUST THROTTLE PEDAL TO FULL THROTTLE AND IDLE POSITIONS
(M548A1)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Engine stopped (see your -10)
Materials/Parts
Carrier blocked (see your -10)
Lock nut (2)
Personnel Required
Center seat raised (see your -10)
Unit Mechanic
Left center seat floor plate raised (WP 0394 00)
ADJUSTMENT
NOTE
Toe stop screw (2) may be mounted on hull or accelerator pedal. Loosen and adjust screw the
same way in either location.
1.
Adjust throttle pedal to full throttle and idle positions as follows:
a.
Loosen jam nut (1) on toe stop screw (2). Turn toe stop screw (2) in to allow free movement of throttle pedal (3).
b.
Loosen jam nut (4) on detent stop screw (5). Turn detent stop screw (5) in to allow free movement of throttle
pedal (3).