TM 9-2350-247-20-2
ADJUST THROTTLE PEDAL TO FULL THROTTLE AND IDLE POSITIONS (M548A1) --
0199 00
Continued
c.
Loosen jam nut (1) on throttle control link (2).
d.
Remove lock nut (3) and screw (4) from cross shaft bellcrank (5). Discard lock nut.
e.
Loosen jam nut (6) on throttle pedal link (7).
f.
Remove screw (8) and lock nut (9). Separate throttle pedal link (7) from cross shaft (10). Discard lock nut.
g.
Hold governor throttle arm (11) and cross shaft bellcrank (5) in full throttle position. Align holes in throttle control
link bearing (12) and cross shaft bellcrank (5) so screw (4) will pass through both freely. Shorten throttle control
link (2) by turning throttle control link bearing (12) 11 turns. Secure jam nut (1).
0199 00-2
