TM 9-2350-247-20-2
ADJUST ACCELERATOR LINKAGE (M548A3) -- Continued
0200 00
4.
(H) Hold throttle pedal heel to stop. Check for free fit when installing screw (4) into rod end bearing (3) and throttle
control lever (1). If there is any binding, turn rod bearing left to lengthen or right to shorten link, until screw fits freely.
5.
Tighten jam nut (5) and check for free pin fit. If adjustment changed, loosen jam nut and tighten until adjustment is a
free pin fit.
6.
Secure rod end bearing (3) to throttle control lever (1) with screw (4), washer (6), and new lock nut (7).
0200 00-3