TM 9-2350-247-20-2
REPLACE THROTTLE PEDAL LINKAGE (M548A1) -- Continued
0197 00
23. Secure throttle pedal link (27) to inner cross shaft (7) with screw (28) and new lock nut (29).
24. Adjust engine governor throttle arm (WP 0198 00).
25. Adjust throttle pedal to full throttle and idle positions (WP 0199 00).
FOLLOW-THROUGH STEPS
1.
Install differential oil filter element (WP 0337 00).
2.
Start engine (see your -10).
3.
Check throttle pedal linkage for proper operation, if not properly adjusted do Steps 24 - 25.
4.
Stop engine (see your -10).
5.
Lower left center seat floor plate (WP 0394 00).
6.
Lower center seat (see your -10).
7.
Install power plant rear access door (see your -10).
END OF TASK
0197 00-7/8 blank
