TURN SIGNAL LAMP, S TOPLIGHT OR CONTROL LIGHT DOES NOT LIGHT OR FLASH WHEN CONTROL IS IN RIGHT OR LEFT TURN POSITIONContinued

TURN SIGNAL LAMP, S TOPLIGHT OR CONTROL LIGHT DOES NOT LIGHT OR FLASH WHEN CONTROL IS IN RIGHT OR LEFT TURN POSITIONContinued - TM-9-2350-247-20-1_348

TURN SIGNAL LAMPS AND STOPLIGHTS DO NOT FLASH WITH CONTROL IN HAZARD POSITION

TM-9-2350-247-20-1 Crane (CAB) Components Recovery Vehicle Full Tracked: light Armored M578 (2360-00-439-6242) (EIC:3LA) Manual
Page Navigation
278

TM 9-2350-247-20-1 TURN SIGNAL LAMP, STOPLIGHT OR CONTROL LIGHT DOES NOT LIGHT OR FLASH WHEN CONTROL IS IN RIGHT OR LEFT TURN POSITION—Continued 0065 00 14Y 1. Turn MASTER SWITCH ON. 2. Connect multimeter to circuit 22-460 (right) and 22-461 (left) harness connectors (1) and ground. 3. Set turn signal unit for right and left turn. 4. Does multimeter show voltage for each connector? YES NO 14YN 1. Repair wiring harness (WP 0294 00). 2. Verify no faults found. 15Y 1. Connect circuit 22-460 (right) and circuit 22-461 (left) connectors to circuit 22 connectors of right and left stoplight-taillights (WP 0278 00). 2. Verify no faults found. 0065 00-9/10 blank

Privacy Statement
Press Release
Contact