TM 9-2350-247-20-1TURN SIGNAL LAMP, STOPLIGHT OR CONTROL LIGHT DOES NOT LIGHT OR FLASHWHEN CONTROL IS IN RIGHT OR LEFT TURN POSITION—Continued0065 0012Y1. Turn MASTER SWITCH OFF.2. Install front turn signal lamp connectors and bulbs (WP 0505 00).3. Disconnect circuit 22-460 (right) and circuit 22-461 (left)connectors (1) from circuit 22 connectors (2) of right and leftstoplight-taillights (3) (WP 0278 00).4. Remove bulb (4) from circuit 22-460 (right) and circuit 22-461(left) light sockets (5).5. Measure resistance of bulb (4) for continuity.6. Does multimeter indicate any continuity?YESNO12YN1. Replace faulty light bulb(WP 0278 00).2. Verify no faults found.13Y1. Connect multimeter to left and right stoplight-taillight circuits 22connector terminal pins (1) and to socket center contact (2).Reading should be 0 ohms.2. Does multimeter show 0 ohms?YESNO13YN1. Replace faulty left stoplight-taillightassembly (WP 0278 00).2. Verify no faults found.0065 00-8
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business