TM 9-2350-247-20-1
TURN SIGNAL LAMP, S TOPLIGHT OR CONTROL LIGHT DOES NOT LIGHT OR FLASH
WHEN CONTROL IS IN RIGHT OR LEFT TURN POSITIONContinued
0065 00
5Y
1. Put turn signal control unit in hazard light position.
2. Measure resistance between terminal pins (G, F) (1), (H, A) (2),
(H, E) (3), (H, B) (4), (H, C) (5), and pin H and lamp socket (6).
Reading should be 10 ohms or less.
3. Did multimeter show 10 ohms or less?
YES
NO
5YN
1. Replace faulty turn signal control
unit (WP 0508 00).
2. Verify no faults found.
0065 00-4