TM 9-2350-247-20-1
TURN SIGNAL LAMP, STOPLIGHT OR CONTROL LIGHT DOES NOT LIGHT OR FLASH
WHEN CONTROL IS IN RIGHT OR LEFT TURN POSITION—Continued
0065 00
10Y
1. Disconnect front turn signal lamp connectors from rear of turn
signal front lights (WP 0505 00).
2. Connect multimeter to turn signal circuit 460 (right) and 461
(left) terminal pins (1) and to socket center contact (2).
3. Do readings show 0 ohms for both pins (1)?
YES
NO
10YN
1. Replace faulty turn signal front light
assembly (WP 0505 00).
2. Verify no faults found.
11Y
1. Turn MASTER SWITCH ON.
2. Connect multimeter to circuit 460 (right) connector (1) and
ground.
3. Set turn signal unit for right turn.
4. Connect multimeter to circuit 461 (left) connector (2) and ground.
5. Set turn signal unit for left turn.
6. Does multimeter show voltage at both connectors?
YES
NO
11YN
1. Repair wiring harness (WP 0294 00).
2. Verify no faults found.
0065 00-7
