TM 9-2350-287-20-1
7-33. LEFT TAlLLAMP ASSEMBLY REPAIR.
This Task Covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
Initial Setup:
Tools/Test Equipment:
Personnel Required: Two
l General mechanic’s tool kit (Item 24,
Appendix l)
Equipment Conditions:
l Vehicle parked on level ground (refer to
Materials/Parts:
TM 9-2350-287-10).
l Electrical tape (ltem 67, Appendix D)
l MASTER switch set to OFF
l Gasket (Item 94, Appendix H)
(refer to TM 9-2350-287-10).
l Lockwasher (2) (Item 177, Appendix H)
l Battery ground cables disconnected
l Lockwasher (8) (Item 196, Appendix H)
(para 7-41).
a.
REMOVAL
CAUTION
1.
Be careful spacers do not fail while taillamp assembly is being removed. Failure to
heed this caution could result in damage to taillamp assembly.
Remove eight
Iockwashers.
NOTE
l Taillamp assembly does not have to be removed to service lamps.
l An assistant is needed when removing taillamp assembly.
screws (3), lockwashers (1), and washers (2) and guard (4) from left-side canister. Discard
7-94
