TM 9-2350-287-20-17-31. HEADLIGHT ASSEMBLY REPAIR (continued).d.INSTALLATIONCAUTION1.2.Do not twist headlight assembly during installation. Damage to connectors mayresult.Position headlight assembly (3) in mount (1), and install retaining clamp (2) on mount (1).Turn T-handle (4) and tighten retaining clamp (2).e.ALINEMENTNOTEAlinement of lights should be performed in shaded or dimly lit areas.1.Measure the distance from the center of sealed lamp unit (service side, clear) to the ground. Duplicate thismeasurement on the wall, drawing a horizontal centerline (20) of lamp unit.2.Draw a line (21) parallel to, and 27 1/4 inches (69.2 cm) below, centerline (20).3.Turn lights on low beam. Centers of right and left beams should be on line (21). Adjust if necessary.4.Connect battery ground cables (para 7-41).5.Turn MASTER switch ON (refer to TM 9-2350-287-10).7-90
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
