TM 9-2350-287-20-1
7-32. HEADLIGHT SEALED-BEAM AND INCANDESCENT LAMP REPLACEMENT
(continued).
7.
Remove two gaskets (10) from two sealed-beam lamps (5). Discard gaskets.
b.
INSTALLATION
1.
Install two gaskets (10) on two sealed-beam lamps (5).
2.
Install incandescent lamp (4) in blackout drive socket (3).
3.
Install blackout drive reflector (3) with incandescent lamp (4) into headlight body (1).
4.
Install marker assembly (9) in headlight body (1) by pushing with screwdriver and turning clockwise. Close
front cover of marker assembly (9).
5.
Connect two electrical connectors (2) to two sealed-beam lamps (5).
6.
Push two sealed-beam lamps (5) into headlight body (1).
7.
Install cover (8) on headlight body (1) with four screws (6) and new Iockwashers (7).
FOLLOW-ON MAINTENANCE:
l None
7-93
